top of page

The vibration measuring device PCE-VM 20 is a compact device for the direct evaluation of the vibration behavior of a machine. The device can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement. Thanks to the integrated real-time FFT analysis, the condition of a machine can be analyzed and determined during the measurement.

 

The PCE-VM 20 vibration meter can evaluate and display signals from IEPE standard piezoelectric vibration sensors as well as piezoelectric vibration sensors with charge output. 

 

Manual

Accelerometer PCE-VM 20

  • - Real-time FFT analysis

    - Robust housing

    - Many vibration parameters

    - Direct evaluation according to DIN ISO 10816

    - Integrated LiPo battery

  • Vibration acceleration 0 ... 200 m/s², RMS and Peak-Peak
    Vibration velocity 0 ... 200 mm/s, RMS
    Vibration displacement 0 ... 2000 μm, Peak-Peak
       
       
    Accuracy vibration ± 5%
       
       
    Operating modes Vibration, temperature, speed
    Representable measured variables Frequency
      Vibration acceleration
      Vibration velocity
      Vibration
      FFT spectrum
       
       
    Units Metric
      Hz, mm/s², mm/s, μm, RPM, Hz
       
       
    Interface USB 2.0
    Storage 4GB micro SD card
    Battery life Up to 8 h continuous operation
    Battery type Lithium polymer
    Display 128 x 160 pixel color LCD
    Environmental conditions -10 ... 55°C / 14 ... 131°F
      ≤ 80% RH not condensing
    Dimensions 132 x 70 x 33 mm / 5.2 x 2.8 x 1.3 in (L x W x D)
    Weight About 150 g / < 1 lb 
       
    Handset: must not be exposed to strong vibrations, magnetic fields, corrosive media or dust
       
    Technical data for the vibration sensor
    Sensitivity 100 mV / g
    Frequency response (± 3 dB) 0.5 ... 15,000 Hz
    Frequency response (± 10%) 2.0 ... 10,000 Hz
    Dynamic range ± 50 g, peak
    Power supply (IEPE) 18 ... 30V DC
    Constant current source 2 ... 10-mA
    Spectral noise at 10 Hz 14 μg / √Hz
    Spectral noise at 100 Hz 2.3 μg / √Hz
    Spectral noise at 1000 Hz 2 μg / √Hz
    Output impedance < 100 Ω
    Bias voltage 10 ... 14V DC
    Housing insulation > 100 MΩ
    Environmental conditions -50 ... 121 °C / -58 ... 249.8 °F
    Maximum impact protection 5000 g, peak
    Resonant frequency 23,000 Hz
    Housing material 316L stainless steel
    Connection 2 Pin MIL-C-5015
    Protection IP68
    Weight 90 g / < 1 lb

Copyright© 2024 by Tops Instruments Supplies Co.  graphics, data sheet, photos and videos all rights reserved. 

bottom of page