top of page

The Aerosol meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the particle counter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³. In addition, the temperature and the ambient humidity are measured. With the alarm limit function, limit values ​​for PM2.5 can be set on the particle counter.

During a measurement it is possible to record the measured values ​​with the Aerosol meter. A memory with a storage capacity of approx. 12 measurement runs, each with 999 measurement points, is available for the particle counter. The interval can be set at different times on the particle counter.

The 8 Wh battery can be charged via the micro USB interface. The battery used in the Aerosol meter enables an operating time of approx. 9 hours. Thus, the particle counter can carry out measurements over an entire working day before it has to be recharged. Since the battery is not permanently installed in the particle counter, it can be easily replaced.

 

Manual

Aerosol meter PCE-MPC 15

數量
  • - Data storage for data logging

    - Adjustable alarm when limit value is exceeded

    - Transport case for safe transport

    - Suitable for indicative measurements

    - Measuring range 0 ... 1000 µm/m³

    - Interface: Micro USB only for charging

  • Mass concentration  
    Measurable particle sizes PM2.5 / PM10
    Measuring range PM 2.5 0 ... 1000 µg/m³
    Resolution 1 µm
    Accuracy PM 2.5 0 ... 100 µg/m³: ±10 µg/m³
      101 ... 1000 µg/m³: ±10% of measured value
       
    Particle counter  
    Measurable particle sizes 0.3 / 2.5 µm
    Resolution 1 µm
    Accuracy reference measurement
    Number of maximum particles 2,000,000 particles/L
       
    Temperature  
    Measuring range -10 ... 60 °C, 14 ... 140 °F
    Resolution 0.01 °C, °F
    Accuracy ±2 °C, ±3.6 °F
       
    Humidity (RH)  
    Measuring range 0 ... 100 %
    Resolution 0.01 %
    Accuracy ±3 %
       
    Further specifications  
    Response time 1 second
    Warm up 10 seconds
    Mounting connection 1/4" tripod connection
    Dimensions intake outside: Ø13 mm / 0.51"
      inside: Ø7 mm / 0.27"
      height: 35 mm / 1.37"
       
    Display 3.2" LC color display
    Power supply (mains adapter)    primary: 100 ... 240 V AC, 50 / 60 Hz, 0.3 A
      secondary: 5 V DC, 2 A
    Power supply (battery) 3.7 V, 8.14 Wh, 18650
    Battery life ca. 9 hours
    Interface Micro USB for charging only
    Auto power off turned off
      15, 30, 45 minutes
      1, 2, 4, 8 hours
    Data memory flash memory for approx. 12 measurement runs
      a measurement run contains 999 measurement points
    Storage interval 10, 30 seconds
      1, 5, 10, 30, 60 minutes 
    Dimensions 222 x 80 x 46 mm / 8.7 x 3.1 x 1.8"
    Weight 320 g / 11.2 oz

Copyright© 2024 by Tops Instruments Supplies Co.  graphics, data sheet, photos and videos all rights reserved. 

bottom of page