PCE-WSAC 50 is an air velocity meter alarm controller that displays the current wind speed as well as the average wind speed of the last 2 and 5 minutes. A pre-alarm and full alarm can be activated based on preset values. If wind speeds are higher than the preset values, a pre-alarm is first applied before the full alarm is issued. Both alarms are delivered visually and audibly. If the pre-alarm is triggered, a yellow LED will flash on the front of the unit and a beep will periodically be emitted as a warning tone. If the full alarm is triggered, a red LED will flash on the front of the unit and a beep will continuously be emitted.
PCE-WSAC 50 allows measurement of the slightest of wind movements. This air velocity meter alarm controller is used for a variety of wind monitoring applications in industries such as construction, mining, renewable energy and manufacturing. If necessary, a relay can also be connected to the controller.
Air Velocity Meter Alarm Controller PCE-WSAC 50
- Pre-alarm and full alarm with visual and audible warnings
- Allows measurement of the slightest wind movements
- Optional RS-485 modbus interface for data communication
- Bright, easy-to-read LED display
- Simple to use
Power supply 115V AC
230V AC
24V DCSupply voltage for sensors (output) 12V DC
24V DCMeasuring range 0 ... 50 m/s or 0 ... 110 mph Measuring accuracy ± 3% of measuring range Signal input (selectable) 4 ... 20-mA
0 ... 5 / 10VAlarm relay 2 NO/NC relays with max. load of 220V AC / 10 A Optional interface RS-485 modbus Operating temperature -20 ... 60°C / -4 ... 140°F Dimensions 197.5 x 90 x 45 mm / 7.7 x 3.5 x 1.7 in Weight Approx. 400 g / < 1 lb