top of page

The CO2 warning device PCE-WMM 100 consists of a main unit and a remote display. The CO2 gas detector PCE-WMM 100 is used to measure carbon dioxide and oxygen in a fixed location. The CO2 warning device protects people from the odourless gas CO2 and also warns of low oxygen content in the air. The gas warning system displays the measured values on an LCD. The PCE-WMM 100 CO2 warning device has two relays that can be used to control alarm lights or sounders. Furthermore, the CO2 warning device has an integrated, acoustic alarm, which emits an audio signal of 80 db in the event of an alarm. 

 

The warning device is used wherever CO2 can be released. This can be in warehouses, breweries, wine cellars or restaurants. The main unit is protected to IP54. 4 LEDs on the front provide information about the system status. 

 

Manual

CARBON DIOXIDE METER PCE-WMM 100

數量
  • - CO2 and O2 sensor

    - Main and remote unit

    - Alarm relay

    - 4 ... 20 mA analog output

    - Acoustic alarm

    - Integrated temperature measurement 

  • Measuring function CO2
    Measuring range 0 .... 50000 ppm
    Resolution <10000 ppm: 10 ppm
      >10001 ppm: 100 ppm
    Accuracy ± 100 ppm / 5 % of measured value
       
    Measuring function O2
    Measuring range O2: 0 ... 30 %
    Resolution 0.1 %
    Accuracy < 3 % of measured value
       
    Measuring function Temperature
    Measuring range 0 ... 50 °C / 32 ... 122 °F
    Resolution 0.1 °C
    Accuracy ± 1 °C
       
    Repeatability CO2: ±20 ppm at 400 ppm
      O2: < ±1 %
    Temperature dependence ± 0.3 % of measured value / °C
    (at 25 °C) ± 2 ppm / °C
      (the larger value applies)
    Pressure dependence 0.13 % of measured value / mmHg
    Response time CO2: T90 < 60s
      O2: T90 < 30s
      Temperature: 20 ... 30 m
       
    Alarm 1 CO2: 5000 ppm, 1 %, 1.5 %, 2 %
      O2: 18 %, 18.5 %, 19 %, 19.5 %, 20 %
       
    Alarm 2 CO2: 1.5 %, 2 %, 2.5 %, 3 %, 3.5 %, 4 %
      O2: 16 %, 16.5 %, 17 %, 17.5 %, 18 %
       
    Alarm sound volume 80 db / 0.1 m
    Heating time < 60 s at 22 °C ambient temperature
    Power supply Power adapter 100 ... 240 V AC / 6 V DC / 0.5 A
    Analog output 2 x 4 ... 20 mA
    Load <150 Ohm
    Relay max. 2 A / 30 V DC / 250 V AC
    Operating conditions 0 ... 40 °C / 32 ... 104 °F / max 95 % r.H.
    Storage conditions -20 ... 60 °C / -4 ... 140 °F / max. 95 % r.H.
    Degree of protection Main unit: IP54
      Remote unit: -
    Dimensions Main unit: 170 x 63 x 26 mm / 6.6 x 2.4 x 1.0"
      Remote unit: 80 x 35.7 x 10 mm / 3.1 x 1.4 x 0.3"
    Weight Main unit: 1200 g incl cable
      Remote unit: 120 g / 4.2 oz

Copyright© 2024 by Tops Instruments Supplies Co.  graphics, data sheet, photos and videos all rights reserved. 

bottom of page