top of page
Concrete Moisture Meter PMI 4
The moisture meter is a measuring device for nondestructive moisture measurement on concrete and screed. Here, the spring electrodes of the moisture meter are pressed onto the surface to be tested. Within seconds, the moisture meter will show the moisture content to the operator. Different scales are already stored in the moisture meter for a wide variety of surfaces. These are available to the operator directly from the moisture meter. 
 
As another special feature, the moisture meter has an automatic shutdown. This feature automatically shuts off the meter if the moisture meter is not used for 5 minutes. This prevents a sudden discharge of the battery at the moisture meter. Another function of the moisture meter is the Max HOLD function. This feature only displays the highest reading to the operator. 
 
- For measuring the moisture in concrete and screed
- Numeric and graphical view 
- Eight spring electrodes are used for the measurement
- Automatic shutdown 
- Ergonomic shape with anti-slip rubber
- Normal measurement and max. HOLD display

Concrete Moisture Meter PMI 4

  • Measuring function Measuring range
    Concrete (H2O) 0 ... 6%
    Cement screed (H2O) 0 ... 6%
    cement screed 0 ... 4%
    (Calcium carbide method)*  
    Anhydrite screed (H2O)   0 ... 3.5%
    anhydrite  0 ... 1.9%
    (Calcium carbide method)*             
    Caisson scale 0.3 ... 15.3 m
    Relative scale 0 ... 100%
    *The calcium carbide method is approximate.
       
    Further specification  
    Accuracy ± 0.5%
    Resolution 0.1%
    Display Graphically monochrome, 128 x 64 pixels,
      61 x 33 mm / 2.4 x 1.3 in, backlight
    Operating conditions 5 ... 40°C / 41 ... 104°F
    Automatic shutdown After 5 minutes of inactivity
    Power supply 2 x 1.5V AA batteries
    Uptime About 20 hours
    Dimensions 147 x 89 x 33 mm / 5.8 x 3.5 x 1.3 in
    Weight Approx. 250 g / < 1 lb (with batteries)
bottom of page