With the ATC HI 9835 conductivity meter you can measure conductivity in µS/cm or in ppm (mg/l TDS measurement field), salt content (NaCl) in % and temperature. With the ATC HI 9835 conductivity meter all measurement values can be represented with automatic or manual temperature compensation. The ATC HI 9835 conductivity meter can have a temperature coefficient between 0.0 and 6.0% and the TDS can be regulated between 0.80 (F1) and 0.40 (F2). The ATC HI 9835 conductivity meter is composed by a waterproof body which can be both used in the countryside or in the laboratory.
Conductivity Meter HI 9835
Technical specifications Measurement fields Temperature 0...+ 60 °C EC conductivity 0.00...29.99 µS/cm; 30.0...299.9 µS/cm
300...2999 µS/cm; 3.00...29.99 mS/cm
30.0...200.0 mS/cm; 200.0...500.0 mS/cmTDS salt content 0.00...14.99 ppm (mg/l); 15.0...149.9 ppm (mg/l)
150...1499 ppm (mg/l); 1.50...14.99 ppt (g/l)
15.0...100.0 ppt (g/l); 100.0...400.0 ppt (g/l)NaCl 0.0 ... 400.0 % Resolution Temperature 0.1 °C EC conductivity 0.01 µS/cm; 0.1 µS/cm; 1 µS/cm;
0.01 mS/cm; 0.1 mS/cmTDS salt content 0.01 ppm; 0.1 ppm; 1 ppm; 0.01 ppt; 0.1 ppt NaCl 0.1 % Accuracy (at 20°C)
Temperature
EC conductivity
TDS salt content
NaCl± 0.4 °CC
+- 1 % of the indicated value
+- 1 % of the indicated value
+- 1 % of the indicated valueCalibration
Temperature
EC conductivity
TDS factor
NaCl2 points calibration
1 point (with 6 registered buffers)
adjustable between 0,40 and 0,80
1 point with optional solution (HI 7037)Temperature compensation automatic or manual 0...60 °C Electrode HI 76309; for rings probe with built-in thermal sensor connected to a 1m cable Power supply 4 x AA 1.5 v batteries (150 h) Auto shut-off after 5 min. (it can be disabled) Operating conditions 0...50 °C 100 % HR Dimensions 196 x 80 x 60 mm Weight 500 g