top of page

The electrical tester PCE-IT100 detects with auxiliary voltages of 125V, 250V, 500V and 1000V insulation resistors up to max. 4000 MΩ. Furthermore, the measurement of low-resistance resistors up to 400 Ω and a measurement function for alternating and also DC voltages is offered by this electrical tester. A continuity tester with a beep is also part of the equipment of the electrical tester. In addition to a data-hold function for holding the current measured value, the max. Or min. Value, in the electrical tester, can also be recorded during voltage and low-ohm measurement. 

 

Thanks to the large numbers and the lighting, the display of the electrical tester is easy to read even under difficult lighting conditions. The large buttons and the rotary knob for selecting the measuring functions allow easy operation of the PCE-IT 100 electrical tester. The electrical tester comes with a set of test leads with test probes, a test lead with crocodile clip and 6 batteries.

 

Observed limits for insulation measurement
- For new plants (dry rooms): 1000 ohms x volts of operating voltage (eg at 230 volts> 230 kOhms)
- For new installations (wet rooms, outdoors): 500 ohms x volts of operating voltage
- Earthed devices: 1000 ohms x volts of operating voltage
- Protected devices: 2 MOhm
- Power tools: 2 MOhm
- Protective extra-low voltage: 250 kOhm
- Electrical measuring devices: 5 MOhm
- Common test voltage values ​​are 100 volts for low voltage and telecommunication systems, 500 volts for building installation and home appliances, 1000 volts for low voltage motors and transformers

 

Manual

Electrical Tester PCE-IT100

數量
  • - Large measuring range

    - 4 different test voltages up to 1 kV

    - Auto power-off function

    - Safety: EN 61010-1, CAT III 1000V

    - Dual display with backlight

    - Carrying case included

    - Single measurement and continuous measurement

  • Measuring range  
    AC voltage (40 ... 400 Hz) 750V
    Resolution 1V
    Accuracy ± 0.8% ± 3 dgt
       
    DC voltage 1000V
    Resolution 1V
    Accuracy ± 1.2% ± 10 dgt
       
    Resistance 40 Ω / 400 Ω
    Resolution 0.01 Ω / 0.1 Ω
    Accuracy ± 1.2% ± 3 dgt
       
    Insulation resistance 4 MΩ / 40 MΩ / 400 MΩ / 4000 MΩ
    Resolution 0.001 MΩ / 0.01 MΩ / 0.1 MΩ / 1 MΩ
       
    Insulation resistance  
    125V ± (2% + 10 dgt) / ± (2% + 10 dgt) /
    ± (4% + 5 dgt) / ± (5% + 5 dgt)
       
    250V ± (2% + 10 dgt) / ± (2% + 10 dgt) /
    ± (3% + 5 dgt) / ± (4% + 5 dgt)
       
    500V ± (2% + 10 dgt) / ± (2% + 10 dgt) /
    ± (4% + 5 dgt) / ± (4% + 5 dgt)
       
    1000V ± (3% + 10 dgt) / ± (2% + 10 dgt) /
    ± (2% + 5 dgt) / ± (4% + 5 dgt)
       
    Continuity test Beep: ≤ 35 Ω, test current ≤ 200-mA
    Equipment supply 6 x 1.5V AA battery
    Environmental conditions 0 ... 40°C / 32 ... 104°F, <80% RH (operation)
    -10 ... 60°C / 14 ... 140°F, <70% RH (bearing)
    Dimensions 200 x 92 x 50 mm / 7.9 x 3.6 x 2 in
    Weight 700 g / 1.5 lbs (with battery)
    Standardizations IEC10101, CAT III 1000V

Copyright© 2024 by Tops Instruments Supplies Co.  graphics, data sheet, photos and videos all rights reserved. 

bottom of page