Thanks to its small dimensions, the miniature Force Gage is easy to use on hard-to-reach measuring points. The height in particular is something special with this Force Gage. With a diameter of only 10 mm, this Force Gage is smaller in diameter than a 1 cent coin.
Force Gage PCE-C-R10LFC series 5-100 kg
Rated load / force F.S. 5 / 10 / 20 / 30 / 50 / 100 kg
50 / 100 / 200 / 300 / 500 / 1000 N
! Rated load / force selectable !Limit load / force 120 % Breaking load / force 150 % Rated output 1.0 – 1.5 mV/V Operating range of supply voltage 2.5 V – 5 V Maximum supply voltage 5 V Deviations of the zero signal ± 2 % F.S. Linearity deviation 1.0 F.S. Reverse voltage (hysteresis) 1.0 F.S. Repeatability 1.0 F.S. Stress creep (30 min) 0.1 F.S. Input resistance 350 ± 10 Ω Output resistance 350 ± 3 Ω Insulation resistance ≥5000 MΩ / 100 VDC Nominal range of ambient temperature -10 … 60 °C / 14 ... 140 °F Service temperature range -20 … 80 °C / -4 ... 176 °F Temperature coefficient of characteristic value 0.1 % F.S. / 10 °C / 50 °F Temperature coefficient of zero point 0.1 % F.S. / 10 °C / 50 °F Sensor cable Ø 2 x 3 m / 6 ft 6" x 9ft 10" (ends open) Cable assignment EXC+ = red
EXC- = black
SIG+ = green
SIG- = white
GND = yellowMaterial / measuring body stainless steel Protection IP65 ! N.B. Rated load / force selectable