top of page

The multi-parameter photometer is a mobile measuring device for liquid analysis. This means that the most varied of measurements can be carried out with the multi-parameter photometer. With this multi-parameter photometer, for example, it is possible to determine alkalinity, chlorine, cyanuric acid or the pH value. In order to carry out a measurement with the multi-parameter photometer, a water sample of 10 ml must be placed in a cuvette. The LED built into the multi-parameter photometer generates a test light in the wavelength ranges of 503 nm, 570 nm and 620 nm. A photodiode now recognizes the value to be measured based on the light transmission of the sample. 

 

Each measurement is automatically saved by the multi-parameter photometer. The stored measured values ​​can then be read out, for example, via a mobile device via the Bluetooth interface built into the multi-parameter photometer. A free app is available to analyze the measured values ​​from the multi-parameter photometer. It is also possible to establish a Bluetooth connection between the multi-parameter photometer and a computer. Free software is also available for this, with which the measurement data can be analyzed. As another special feature of the multi-parameter photometer, the measurement data can be uploaded to a cloud using both variants and accessed from anywhere. This service for the multi-parameter photometer is also free of charge.

 

Manual

Photometer PCE-CP 30

數量
  • - Up to 13 selectable parameters

    - Bluetooth connection with app

    - Exchangeable and lockable cuvette

    - 503 nm / 570 nm / 620 nm LED

    - Automatic shutdown when inactive

    - Many different menu languages

    - Light detector: photodiode

    - Cuvette: 36 x ø 21 mm / 3.6 x ø 2.1 cm (10 ml)

Copyright© 2024 by Tops Instruments Supplies Co.  graphics, data sheet, photos and videos all rights reserved. 

bottom of page