The main advantage of a steady-state stroboscope RT STROBE 5000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first defective part which has to be replaced. In comparison to that, the LEDs of this stroboscope are nearly indestructible with no detectable wear. 120 LEDs achieve a significantly higher flash frequency than xenon-tubes and produce a subjectively pleasant light with noiseless flashes. The activation of the rotation speed control counter occurs directly by the observed system or via the supplied control unit RT Strobe ECO control. This small control unit can simply be plugged into one of the jacks on the rear panel of the stroboscope. Due to the standard existing connections, both, a machine signal, and a signal of the control unit can be transmitted simultaneously. Switching between the two inputs can be achieved by using the rocker switch on the rear side of the stroboscope.
Stroboscope RT STROBE 5000 LED
- low-wear LED light trigger
- illumination level 300 x 500 mm
- high intensity of light 7500 LUX
- adjustable light frequency
- web width> 500 mm
- rotary device parallel operation
Technical data
General parameterFrequency range 0…120,000 FPM (flashes per minute) Voltage supply 15...28V DC/ 60W External triggerinput 3...30 V / max. 5 mA
(potential freeOptokoppler)
DIN 41524 5pin Standardstecker
Uout = Uin, max. 200 mA
Trigger input switchableTriggeroutput for parallel circuit Flash Parameter Flash period < 10 μs. Luminous intensity standard, 30 – 100% Light intensity single flash ca. 20 Mega-Lux / 30 cm / 12" Mean ca. 7,500 Lux / 30 cm / 12” (@ 6.000 FPM) Flash energy 2.000mJ (@ ≤ 1.000 FPM) Light colour 6000...6.500K Case Material Aluminium Diameter 224 x 130 x 112 mm / 8.8 x 5.1 x 4.4˝ Weight 2,100 g Ambient conditions Ambient temperature 0...40 °C (32...104 °F) Storage temperature -25...70 °C (-13...158 °F) Humidity Max. 95 %, non-condensing