The PCE-TG 300-NO7 is a thickness gauge with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness meter. For damping or scattering materials such as plastic or cast a special sensor is available. An angled 90° sensor also enables measurements at hard-to-reach measuring points. The speed of sound can be set freely on the thickness meter and thus adapted to a wide variety of materials.
The measured values are displayed directly on the easy-to-read TFT color display. Due to the internal memory, which can be read out via the optionally available software, different measuring points can be clearly stored. The non-destructive ultrasound measuring method enables the measurement even on end products. Thanks to the Echo-Echo working mode, even coated workpieces can be measured (only with PCE-TG 300-P5EE sensor).
Thickness Gauge PCE-TG 300-NO7
- Large measuring range
- Various sensors available
- Battery operation
- Error and voids detection
- Internal measurement data memory
- Print via Bluetooth
PCE-TG-NO7 sensor Measuring range 0.65 ... 200 mm / 0.025 ... 7.87" (steel) Minimum diameter of pipes 15 x 2 mm / 0.59 x 0.07" Frequency 7 MHz Diameter 6 mm / 0.23" Description for thin-walled or strongly curved pipes PCE-TG 300-NO7 device Measuring range P-E: pulse-echo mode 0.65 ... 600 mm / 0.025 ... 23.62" (steel)" (measurement range varies depending on the sensor) E-E: Echo-Echo mode 2.50 ... 100 mm / 0.098 ... 2.36" (only with PCE-TG 300-P5EE sensor) Accuracy ±0.04 mm H[mm] (<10 mm); ±0.4 % H[mm] (>10 mm) H refers to the material thickness of the workpiece Resolution 0.1 mm / 0.01 mm / 0.001 mm (adjustable) Measurable materials metals plastics ceramics epoxy resin glass and all homogeneous materials Working modes Pulse-echo mode (fault and void detection) Echo-echo mode (hide layer thicknesses, e.g. paint) Calibration sound velocity calibration zero calibration two-point calibration View Mode Normal Mode, Scan Mode, Difference Mode Units mm / inch Data transfer printing via Bluetooth / USB 2.0 Memory non-volatile memory with 100 data groups with 100 data sets each Operating time continuous operation 100 h automatic stand-by mode (adjustable) auto power off mode (adjustable) Power supply 4 x AA battery 1.5 V Display 320 x 240 pixels TFT LCD color display with brightness adjustment Operating conditions 0 ... +50 °C / 32 ... 122 °F, ≤80 % RH non-condensing Storage conditions -20 ... +70 °C / -4 ... 158 °F, ≤80 % RH non-condensing Dimensions 185 x 97 x 40 mm / 7.2 x 3.8 x 1.5" Weight 375 g / 13.2 oz