TDS 100H is a portable, handheld, clamp-on ultrasonic flow tester or meter used for non-invasive, unobstructed, unwetted, highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 50 ... 700 mm / approx. 1.97 ... 27.55".
Ideal for use in oil and gas, water and wastewater, chemical, food and beverage, pharmaceutical, metals and mining, pulp and paper, power and heating, ventilation, air conditioning and refrigeration (HVACR) industries, this ultrasonic flow meter features user-friendly velcro-strap clamps that allow for quick and easy repositioning of the electroacoustic transducers.
手持式超聲波流量測試儀，無須更換或拆開水管。可測量金屬、塑及橡膠水管中的液體流速，探測水管直徑為50-700mm
Ultrasonic Flow Tester TDS 100H | 超聲波水量計
Measuring range 0.01 ... 30 m / s Resolution 0.0001 m / s Accuracy ±1 % of measured value Units meters, feet, cubic meters, liters, cubic feet, gallon, oil barrel, liquid barrel, million gallon Linearity 0.5 % Repeatability 0.2 % Response time 0 ... 999 seconds, freely configurable Pipe diameter 50 ... 700 mm / approx. 1.97 ... 27.55" Measuring media Virtually all homogeneous liquids, including sanitary, corrosive and abrasive liquids Head Type M1 Cable length Approx. 5 m / 16.4 ft each (x 2) Display 4 x 16 LCD, 7 digits for net flow, positive and negative flow Power supply 3 x AAA Ni-H rechargeable batteries Battery life Approx. 10 hours continuous use at full charge Battery charger 100 .. 240 V / AC Interface RS-232C Memory Stores up to 2,000 values Housing material ABS plastic Dimensions Device: 100 x 66 x 20 mm / 3.93 x 2.60 x 0.79 "
Transducers: Each 60 x 45 x 45 mm / 2.36 x 1.77 x 1.77"Operating temperature 0 ... +70 ºC / +32 ... +158 ºF