The vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. This vibration meter uses the external vibration sensor to determine the vibration displacement (measuring range 0.000 ... 3.9 mm), the vibration velocity (measuring range 0.00 ... 399.9 mm/s) and the vibration acceleration (measuring range 0.0 ... 399.9 m/s²). Various measurement parameters are available for the vibration meter, such as RMS, peak, peak-peak and crest factor. The vibration meter is equipped with a mode that allows a measurement to be automatically evaluated according to the limit values of ISO 10816-3. The vibration meter analyzes the measured values and shows a corresponding good/bad rating on the display. The built-in battery in the vibration measuring device has a capacity of 2500 mAh and can be recharged directly via the built-in micro-USB interface.
In addition to the normal measuring mode, the vibration meter has an FFT mode. In the FFT mode, the frequency spectrum for the measured vibration speed or vibration acceleration is calculated and displayed. The calculated FFT lines are displayed in a graphic representation in an overall view for the entire frequency band and parallel to this in a zoom view to display the individual lines.
An additional function is route measurement. The route measurement is specially designed for recurring measurements at identical measuring points. This enables an orderly measurement of different measuring points. Because of its extensive measuring functions, the vibration meter is therefore used for maintenance and repair work on machines.
The measurement data displayed for the various measurement functions can be stored in the internal memory of the vibration meter. After a measurement, the measurement data stored on the vibration meter can be transferred to a PC via the built-in micro USB interface. The software for the vibration meter then enables a graphic and tabular analysis of the measured values. The software can export the measurement data as a CSV file for further processing. In order to keep the vibration measuring device up to date, the software can also perform an automatic firmware update in addition to analyzing the measurement data.
- For mobile vibration measurement
- Measuring range up to 399.9 m/s² / 15744 in/s²
- FFT analysis
- Route measurement
- Manual measured value memory
- Automatic ISO 10816-3 evaluation
- Internal memory
- 2.48" LC display
- Rechargeable battery
- Micro-USB interface
Vibration Meter VT 3900
Measuring range Acceleration 0.0 ... 399.9 m/s² / 0.0 - 15744 in/s² Resolution 0.1 m/s² / 3.94 in/s² Accuracy @ 160 Hz ±2 % Frequency range 10 Hz ... 10 kHz 1 kHz ... 10 kHz Measuring range Velocity 0.00 ... 399.9 mm/s / 0.00 - 15.74 in/s Resolution 0.1 mm/s / 0.0039 in/s Accuracy @ 160 Hz ±2 % Frequency range 10 Hz ... 1 kHz Measuring range Rotational Speed 600 ... 50000 RPM FFT acceleration 10 Hz ... 8 kHz FFT velocity 10 Hz… 1 kHz Accuracy @ 160 Hz ± 2% Number of FFT lines 2048 Route measurement 100 routes each with 100 machines each with 100 measuring points with 1000 measured values each Measuring range Displacement 0.000 ... 3.9 mm / 0.000 - 0.154 in Resolution 1 µm / 39.4 µin Accuracy @ 160 Hz ±2 % Frequency range 10 Hz ... 200 Hz Measurement parameters RMS, Peak, Peak-Peak Crest factor Manual memory 99 folders with 50 measured values each Data logger Various start/stop triggers Measurement interval between 1 s … 12 h 50 memory locations with 43200 measured values each Units can be switched to metric / imperial Display 2.48" LC display Menu languages English, German, French Spanish, Italian, Dutch Portuguese, Turkish, Polish Russian, Chinese, Japanese Power supply internal: LiPo battery (3.7 V, 2500 mAh) external: USB 5 VDC, 500 mA Operating time ca. 15 … 20 h (depending on display brightness) Operating and storage conditions temperature: -20 ... +65 °C / -4 ... 149 °F humidity: 10% RH ... 95% RH, non-condensing Dimensions 165 x 85 x 32 mm / 6.5 x 3.3 x 1.3" Weight 239 g / 8.4 oz Resonance frequency 24 kHz Transverse sensitivity ≤ 5% Destruction limit 5000 g (peak) Operating and storage temperature -55 °C … +150 °C / -67 °F ... 302 °F Housing material stainless steel Mounting thread ¼ - 28“ Dimensions Ø 17 x 46 mm / 0.67 x 1.8" Weight (without cable) 52 g / 1.8 oz